Regenerative decomposition device (RTO)

CO 2 H 2 O ,同时释放大量热量,经氧化分解的高温废气进入低温蓄热体项充层,将热能传递给蓄热体后递过切换阅排放到大气中,其排放温度仅略高于废气处理前的温度。 The organic waste gas is first pre-heated by the "heat storage" high-temperature ceramic roll filling layer. The steam-heated ceramic roll has good heat exchange characteristics by the members of the high heat conduction system. The pre-heated organic waste gas is heated to 800 by the combustion chamber. At about ℃, it rapidly oxidizes and generates harmless CO 2 and H 2 O. At the same time, a large amount of heat is released. The high-temperature exhaust gas decomposed by oxidation enters the low-temperature thermal storage layer, and transfers heat energy to the thermal storage body. In the atmosphere, its emission temperature is only slightly higher than the temperature before the exhaust gas treatment.
The above process automatically completes the entire process through a PLC-controlled switching valve. All ceramic roll heat storage bodies complete the cycle of heat release and heat absorption, and the heat generated during the oxidation system reaction process can be fully utilized.

Technical characteristics
★ Easy operation; PLC automatic control is realized when the equipment is working;
★ Safe and reliable: The safety settings are fully equipped, and the equipment is equipped with protection measures such as fire resistance system, explosion-proof pressure relief system, alarm device and automatic shutdown;
★ Reuse of waste heat: the waste heat can be returned to the drying tunnel to reduce the power consumption in the original drying tunnel, and it can also be used as a heat source in other aspects;
★ Heat recovery efficiency: Honeycomb ceramic with high thermal conductivity is used as heat storage body;
★ The removal efficiency can reach more than 95%, and the heat recovery rate can reach more than 95%.

蓄热01
Regenerative Catalytic Decomposition Unit (RCO)

The organic waste gas is first pre-heated through the high-temperature sea porcelain filling layer that has been "heat-storage". The heat-storage porcelain is made of a material with high thermal conductivity and has good heat exchange characteristics. CO 2 H 2 O ,同时释放大量热量。 The pre-heated organic waste gas is heated to about 250 ° C through the combustion chamber, and is rapidly oxidized and generates harmless CO 2 and H 2 O under the action of the catalyst , while releasing a large amount of heat.
The oxidatively decomposed high-temperature exhaust gas enters the filling layer of the low-temperature heat storage body, and after transferring the thermal energy to the heat-generating body, it is discharged into the atmosphere through a switching valve.
The above process is automatically completed by a PLC-controlled switching valve, and all ceramic heat storage bodies complete the cycle steps of heat release and heat absorption, and the heat generated during the oxidation system reaction process can be fully utilized.

Technical characteristics
★ Easy to operate. When the equipment is working, realize automatic control;
★ Low ignition temperature and low energy consumption;
★ Safe and reliable, with complete safety settings and equipment, equipped with fire protection system, explosion-proof pressure relief system, alarm device and automatic shutdown and other protection measures;
★ Reuse of waste heat: the waste heat can be returned to the drying tunnel to reduce the power consumption in the original drying tunnel; it can also be used as a heat source in other aspects;
★ Small resistance and high purification efficiency. Adopt high-quality cargo metals, rare earths and metal oxides as catalysts on the fossa-shaped ceramics;
★ Long catalyst life:
★ The reaction temperature is low, no secondary pollutants such as nitrogen oxides are generated, and all processes will not cause secondary pollution;
★ The removal efficiency can reach more than 95%, and the heat recovery rate can reach more than 95%.

蓄热02